Home  >  Products > 5V/12V DC Input Microwave Motion Sensor > Remote Controllable Version
5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version

5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version

HNS111

5.8GHz C-band microwave.

Input voltage 12V DC (5V & 24V DC version available on request).

Input current:≧25mA.

Model:HNS111 / 12V DC sensor module with 5V DC high-low voltage & PWM output

on/off control ---at high-low voltage output

tri-level dimming control --- at PWM output

5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version

Features

5.8GHz C-band microwave.


Input voltage 12V DC (5V & 24V DC version available on request).


Input current:≧25mA.


5V DC high-low voltage & PWM output signal(0~10v version available on request)


Super compact, flexible to be integrated into any suitable fixtures.


Dual-Processor technology, real Lux -Off & Daylight monitoring function for built-in application.

 

IR remote commissioning, easy setting and user friendly.


Detection range up to 12m in diameter.


Mounting height: 3~6m.

Operation temperature: -20℃ ~ +70 ℃


RoHS compliant.

Settings(Remote control IR12)


Permanent ON/OFF function

Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.

*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.


Dim +/-

Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.

*after desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.


Sensor mode

Press "Auto" button, the  sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.


Reset function

Press "Reset" button, all settings go back to factory default settings.

Factory default settings--

        Sensitivity=100%

        Daylight sensor=disable

        Hold time=90s

        Twilight time=5min

        Twilight level=10%


Ambient learn

Press "Ambient learn" button, the latest surrounding  lux   value overwrites previous lux value learned, and set as the  daylight threshold. This feature enables the fixture to function well in any real application circumstance.


Test mode

"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.


Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.


*Test mode defaulted settings—

         Daylight sensor=disable

         Hold time=3s 

         Twilight time=N/A

         Twilight level=N/A

In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).


Microwave Motion Sensor Module


Microwave Motion Sensor Module


Detection pattern

Microwave Motion Sensor Module


Daylight monitoring function

Utilizing the Dual-Processor technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).


This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.


Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.


         Lux-On function takes effect only when standby dimming period set at+∞


Microwave Motion Sensor Module

Follow Us

CONTACT US

Add: Floor 14th, Hui-Jing-Yuan Science & Technology Innovation Park, #531 Nan’pu Road, Shajing, Bao’an District, Shenzhen, P.R.C.

Technical Support: