12V DC Input Microwave Doppler Sensor 1 ~ 10v Dimming For Tri - Proof Fixture

                                 Special For Tri - Proof Fixture , Presence Motion Detector , 12V DC Input , 1 ~ 10v Dimming

12V DC input motion sensor with 1~10v dimming output, special housing designed for Tri-proof fixtures.

Dual-processor technology to differentiate the natural light and lamp light, daylight monitoring function available.

Features--

Input voltage: 12V DC (5V & 24V DC version available on request).

Input current: ≥ 25mA.

1~10V DC dimming output signal.

Dual-processor technology, real Daylight monitoring function for built-in application.

Detection range up to 12m in diameter.

Mounting height: 3~6m.

Operation temperature: -20℃~ +70℃ .

Settings--

Detection range

Hold-time

Hold-time means the time period to keep the lamp on 100% after motion detected.

*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.

Daylight sensor

Daylight sensor means the daylight threshold to enable or disable the sensor function.

"Disable":        The sensor works always, even during daylight.

"50lux":            The sensor works only in twilight.

"10lux, 2lux”: The sensor works only in the dark.

Stand-by period

This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.

“+∞”: means bi-level dimming control, the fixture never switch off.

Stand-by dimming level

This is the dimmed low light level you would like to have after the hold-time in the absence of people.

Detection pattern--

Daylight monitoring function--