Payment & Shipping Terms:
|Input Voltage:||12V/ 24V DC||Input Current:||≥25mA|
|Type:||Security Sensor||Detection Range:||Max. 12m In Diameter|
Security sensor 5.8GHz new microwave security sensor for intelligent enhanced detection range
5.8GHz C-band microwave motion sensor used in security business. 1~10V dimming signal output. Customized products and services for you all the time.
Ulti small size for integrating into any suitable fixtures.
Real built-in appication for Dual-processor technology.
Remote commissioning, easy setting and user friendly.
Max. up to 12m in diameter for detection range.
3~6m for mounting height.
Operation temperature: -20°C~ +70°C.
|Input voltage:||12V/24V DC|
|Output signal:||1~10V dimming control|
Settings(by remote control IR12)--
Permanent ON/OFF function
Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto” ,”Reset" or “Ambient learn” to quit this mode.
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.
Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Press”Reset” button, all settings go back to factory default settings.
*Factory default settings on request
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
"Test mode"is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings on request
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
Ceiling mouting is up to 12m in diameter
Wall mounting is up to 20m.
Daylight monitoring function--
This is the REAL& INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.
Lux-On function takes effect only when standby dimming period set at +∞.
Contact Person: sales