|Place of Origin:||Shenzhen, China|
|Certification:||RED, FCC, RoHS, ETL|
|Minimum Order Quantity:||300pcs|
|Price:||To be negotiated|
|Packaging Details:||Bubble bag + carton. (color box or blister package also available on request)|
|Delivery Time:||3~4 weeks for bulk orders|
|Supply Ability:||30,000pcs / month|
|Input Voltage:||24V DC Can Be Customized, 12V DC||Input Current::||≥25mA|
|Usage:||Special Lights Like Explosion-proof Light Etc.||Function:||Tunable White, 0-10V Dimming|
|CCT Quick Selection:||Cool, Neutral And Warm Three Options||Setting:||DIP Switch And Remote Control|
Tunable 12V Microwave Sensor,
Remote Control 12V Microwave Sensor,
25mA 0-10V Dimming Motion Sensor
12V microwave sensor Tunable white 0-10V dimming motion sensor HNS117
1. Tunable white and tri-level dimmming function by remote control setting (2 channels output), three color temperature options
2. small size motion sensor and daylight sensor
|1.||Operating voltage:||12V input|
|2.||Small size:||flexible to be integrated into any suitable fixtures.|
|3.||Easy access by DIP switch||shift between cool, white and warm.|
|4.||CCT quick selection (DIP switch)||DIP switch + IR Remote control 2 channels CCT setting|
|6.||Output signal:||0~10V, PWM signal can be customized, achieve color temperature adjustments.|
Source current / Sink current:
Max. 20mA; 0-10V leads can not be short-circuit.
Cool: Long press to adjust the color temperature towards Cool , release to stop and lock down current color temperature.
Neutral: Press “Neutral” button, the color temperature will adjust to 50% cool + 50% warm.
Warm: Long press to adjust the color temperature towards Warm , release to stop and lock down current color temperature.
Test mode defaulted settings--
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off.
OCC OFF function
Press “OCC OFF” button, the motion sensor will be disabled.
Press “Dim” button to automatically dim up or down the light brighness during hold-time from 10% to 100%. Another press to lock it down when
desired brightness is achieved.
Press “Reset” button, all sensor settings go back to factory default settings.
press “OCC ON” , “Reset” or “Ambient” to re-activate the motion sensor.
Factory default setting: