|Function:||Timer & Tri-level Dimming||Input Current:||≥8mA|
|Output Signal:||0~10V / PWM||Setting:||8 Pin DIP Switch Setting, Multiple Options To Meet Different Customer Demands|
|IP Rating:||IP20||Type:||DC Input, Daylight Sensor|
8 pin dip motion sensor detector,
ip20 microwave movement sensor
Microwave motion sensor switch timer function and tri-level dimming function daylight sensor
Dual-processor technology, distinguish natural light and artificial light(lamp) from behind the diffuser, authentic daylight sensor for built-in application.
Super compact, flexible to be integrated into any suitable fixtures.
Built-in timer, for end user to specify desired period to keep the light 100% on before dim down.
|Input voltage:||12 / 24V DC|
|Function:||Tri-level dimming, not only for simple ON/OFF control, save more energy.|
1. Daylight threshold
This is the threshold for the daylight sensor to switch on & off.
“Lux on”value means the daylight sensor will switch on when detected natural light is less than it.
“Lux off”value means the daylight sensor will switch off when detected natural light is more than it.
Note: Lux-on sampling time--10s; Lux-off sampling time--30s.
Lux on: 5lux,10lux,25lux,50lux,100lux, disable for your options
Lux off: 25lux,40lux,60lux,90lux,200lux, disable for your options
2. Timer period
This is the period for the lamp to keep 100% on when natural light 5 is below set threshold.
2h,4h,6h,8h,12h, disable for your options
3. Dimming level
After the timer period, if the natural light is still insufficient, the lamp will drop to a pre-defined dimming
level. this dimmed level will sustain until the natural light becomes enough and the daylight sensor switch
0%,10%,30%, 50% for your options
Setings for below scenario: At 7:00AM, when natural light becomes sufficient, the daylight sensor
automati-cally switch the fixture off.