Motion Sensor Dimmer Switch 1 ~ 10v Dimming 5.8GHz HF Frequency
|Place of Origin||Shenzhen|
|Certification||RED, FCC, RoHS|
|Minimum Order Quantity||500pcs|
|Packaging Details||Bubble bag + carton. (color box or blister package also available on request)|
|Delivery Time||4 weeks for bulk orders|
|Supply Ability||40,000pcs / month|
|Input Voltage||12V DC (5V & 24V Version Available On Request)||Input Current||≥25mA|
|Control Type||1~10v Dimming||Detection Range||Max. 12m In Diameter|
|Mounting Height||3~6m||Operation Temperature||-20℃ ~ +70℃|
|HF Frequency||5.8GHz||Product Guarantee||5 Years|
|Dual Daylight Sensor||Yes||Settings||By Remote Control IR12|
motion dimmer switch,
dimmer sensor switch
Remote Controllable , Dimmable Motion Sensor , 1 ~ 10v Dimming , Daylight Monitoring Function
12V DC input motion sensor with 1~10v dimming output, infrared remote for end-user to change all the settings, dual-processor technology to differentiate the natural light and lamp light, daylight monitoring function available.
Input voltage 12V DC (5V & 24V DC version available on request).
1~10V dimming signal. (5V DC high-low voltage & PWM output version available on request)
Dual-processor technology, real Lux -Off & Daylight monitoring function for built-in application.
IR remote commissioning
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20℃ ~ +70 ℃
Settings(by remote control IR12)--
Permanent ON/OFF function
Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto” ,”Reset" or “Ambient learn” to quit this mode.
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.
Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Press”Reset” button, all settings go back to factory default settings.
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
"Test mode"is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
Daylight monitoring function--
Utilizing the Dual-processor technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required (ambient light is bright enough).
Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.
Lux-On function takes effect only when standby dimming period set at +∞.