Daylight Monitoring Microwave Motion Sensor Switch Tri - Level Dimmable

        Daylight Monitoring Function , Microwave Motion Sensor Switch , Tri - Level Dimmable

DC input motion sensor for tri-level dimming control, DIP switch setting, dual-processor technology to differentiate the natural light and lamp light, in this way to keep the daylight sensor not effected by the light from the fixture itself. Real daylight monitoring function for built-in installation.

Features--

5.8GHz C-band microwave, tri-level dimming function.

Input voltage 12V DC (5V & 24V DC version available on request).

Input current:≥25mA.

Dual-processor technology, real Daylight monitoring function for built-in application.

Detection range up to 12m in diameter.

Mounting height: 3~6m.

Operation temperature; -20℃ ~ + 70℃.

Settings--

Detection range

Detection range can be reduced by selecting the combination

on the DIP switches to fit precisely each application.

Hold-time

Hold-time means the time period to keep the lamp on 100% after motion detected.

*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to      choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.

Daylight sensor

          Daylight sensor means the daylight threshold to enable or disable the sensor function.

"Disable":        The sensor works always, even during daylight.

"50lux":            The sensor works only in twilight.

                  "10lux_, 2lux":  The sensor works only in the dark.

Stand-by period

This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.

    “+∞”: means bi-level dimming control, the fixture never switch off.

Stand-by dimming level

This is the dimmed low light level you would like to have after the hold-time in the absence of people.

Detection pattern--

Daylight monitoring function--

Utilizing the Dual-processor technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).

This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.

Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.

  Lux-On function takes effect only when standby dimming period set at+∞.